WallStack

WallStack

The only retaining wall calculator that gives you a complete cut list with drain pipe and filter fabric — ready to take to Home Depot.

Dry-stacked landscape block walls: blocks, caps, gravel base, drainage stone, drain pipe and filter fabric, with the buried course added for you.
Mortared concrete block and cinder block walls: blocks, half-block cuts, mortar bags, caps and base, plus drainage when the wall holds back soil.

From wall size to shopping list

Most wall calculators give you a block count and stop. A wall needs more than blocks: a gravel base, drainage stone, a drain pipe with its fittings and filter fabric — and the store sells those in tons, sticks and rolls, not in cubic yards and square feet.

Enter the length and height of your wall and the calculator works out every material, then converts each one into what goes in the cart. The results update as you type, and the calculation steps show exactly how each number was reached.

What is on the cut list

  • Blocks and caps, with the pallet count for larger walls
  • Half blocks to cut for a running bond
  • Crushed stone for the base, in tons or bags
  • Clean drainage stone behind the wall
  • Perforated drain pipe in 10 ft sticks, with tees, end caps and outlet grates
  • Non-woven filter fabric in 3 ft x 50 ft rolls, seam overlaps included
  • Mortar bags for concrete block walls

Estimates, with the working shown

Every coefficient comes from a published source — block manufacturer guides, industry best-practice documents and product data sheets — or is a stated estimating allowance. The numbers are material estimates for planning and shopping, not a wall design.